Aim® EC herbicide / West / Fall

Chemical Group: Group 14

Registered and Supported Tank Mixes: Recommended to be tank-mixed with glyphosate.

• Express^® SG herbicide
• Express^® Pro herbicide
• Express^® FX
• MCPA Ester
• Command^® 360 ME herbicide
• 2, 4-D Ester
• Authority^® 480 herbicide
• Authority^® Supreme herbicide
• Authority™ Strike herbicide
• PrecisionPac^® NC-0050
• Nufarm Koril^® 235
• IPCO Brotex^® 240, 480 & 4AT
• Bromotril^® 240 EC and Bromotril^® II 240 EC
• PrecisionPac^® DB-878
• PrecisionPac^® NC-00439
• PrecisionPac^® SZ-75
• Reglone^® ION

Rates and Packaging: 

Surfactant: None required when tank-mixing with glyphosate. When using Aim^® EC herbicide alone for pre-plant/pre-emergence, fallow and post-harvest application, use a non-ionic surfactant at 0.25% v/v or use Destination™ MSO (1% v/v), Journey™, Destinaire™ High Surfactant Oil
Concentrates (0.5% v/v) or Merge^® at 1% v/v. Higher rates are recommended when applying Aim^® EC herbicide alone at burn-off timing. For harvest aid uses, use Agral^® 90 or Ag-Surf^® at 0.25% v/v (0.25 litres per 100 litres of spray solution) or use Merge^® at 1% v/v (1 litre per 100 litres of spray solution). The use of Agral^® 90 is not recommended in the spray mixture of Aim^® EC herbicide + Reglone^® Desiccant for use on potatoes except in the Prairie Provinces.

Water Volume: Minimum of 10 gal/ac (100 L/ha)

Rainfastness: Aim^® EC is rapidly absorbed through the foliage of plants, Rainfall soon after application may reduce efficacy.

Crop rotation: No following year cropping restrictions.

Mixing instructions: Spray equipment must be clean and free of existing pesticide deposits before using this product. Follow the spray tank clean-out procedures specified on the label of the previously applied product, before adding Aim^® EC herbicide to the spray tank.

For best results, fill the spray tank with one half the volume of clean water needed for the area to be treated. Make sure the agitation system is operating while adding products. Slowly add the required amount of Aim^® EC herbicide to the spray tank. Carefully rinse the container, adding the rinsings to the spray tank. Complete filling the spray tank to the desired level. Spray tank agitation should be sufficient to ensure uniform spray mixture during application and must continue until the spray tank has been emptied.

• If sprayer has been stored or idle, purge the spray boom and nozzles with clean water before charging sprayer with products to be applied.
• Avoid overnight storage of Aim^® EC herbicide spray mixtures.
• Premixing Aim^® EC herbicide spray solutions in nurse tanks is not recommended. Maintain continuous and adequate spray solution agitation until all spray solution has been used.
• Do not use with tank additives that alter the pH of the spray solution.