PRECISIONPAC® PF-100-0050 Herbicide / WEST / PRE-SEED

Chemical Group: 2 & 15 

Registered & Supported Tank Mixes: 

• Glyphosate 

Timing: 

Pre-plant or post-seeding (up to 3 days after seeding) 

Note: PrecisionPac^® PF-100-0050 herbicide requires minimum of 1/2”, at once, of rainfall for activation. For best control, PrecisionPac^® PF-100-0050 herbicide must be applied and activated prior to weed emergence. To control emerged weeds, tank-mix with a supported burnoff tank-mix partner. 

Application Information: 

Rates: 77.70 g/ac 

Acres per grower bag: Minimum: 20 acres; Maximum: 100 acres 

Surfactant: Please check label for surfactant recommendations based on tank-mix partner 

Water Volume: Minimum 10 US gal/ac (100 L/ha) 

Mixing Instructions: For complete mixing instructions, follow WAMLEGS or refer to the label. 

PrecisionPac^® PF-100-0050 herbicide should be applied to uniform seedbed that is firm and free of clods. Before applying to spring or winter wheat, verification of PrecisionPac^® PF-100-0050 herbicide selectivity on wheat varieties must be confirmed with your local seed company or supplier to avoid potential injury or yield losses to sensitive varieties. 

Restrictions: 

• DO NOT use on peat or muck soils and soils with 7% or more organic matter content. 

• DO NOT use on soils with a pH greater than 7.8. 

• DO NOT use on coarse textured soils. PrecisionPac^® PF-100-0050 herbicide is intended for medium-fine to fine soil textures.  

• DO NOT apply to wheat in combination with products containing sulfentrazone. 

• DO NOT apply to wheat in the spring if a product containing sulfentrazone was applied the previous fall. 

• DO NOT apply with any other products containing pyroxasulfone. 

• DO NOT apply if products containing pyroxasulfone were applied the previous fall. 

• DO NOT apply products containing saflufenacil with, before or after application of PrecisionPac^® PF-100-0050 herbicide as crop injury may occur. 

• DO NOT apply products containing tiafenacil with, before or after application of PrecisionPac^® PF-100-0050 herbicide as crop injury may occur. 

Rates & Packaging: 

• Rate – 77.07 g/ac 

• Min acres – 20 acres 

• Max acres – 100 acres 

• Customized package size to fit your sprayer tank or field size 

Water Volume: 

• Water Volume: Minimum 10 US gal/ac (100 L/ha) 

Mixing Instructions: 

Start with a clean empty sprayer.  Ensure sprayer is equipped with 50 mesh screens or filters when using FMC products. 

Fill sprayer tank ½ full with clean water in order to ensure enough water for added product to dilute properly 

With agitator running, slowly add the FMC PrecisionPac^® products according to their formulation as shown below in the WAMLEGS chart.   

• Wettable powders, dispersible granules, soluble granules (WG, DF, SG, WP, SP) 

• Agitate tank mix thoroughly 

• Micro-encapsulated suspensions (ME) 

• Liquid flowables and suspensions (SC, SL, SN, Li, SU, SE) 

• Emulsifiable concentrate formulations (EC) - Fill spray tank nearly full with water 

• Glyphosate formulations 

• Surfactants - Complete filling the spray tank to the desired level