Skip to main content
Click to open menu
Click to close menu
Begin main content

PRECISIONPAC® SZ-75 Herbicide / WEST / FALL

Give your crop the clean start it deserves.  PrecisionPac® SZ-75 herbicide is a flexible pre-emergent Group 14 herbicide for soybeans, field peas, chickpeas and wheat (spring and durum).  PrecisionPac® SZ-75 herbicide has best-in-class control of kochia, including Group 2, Group 4 and Group 9 resistant biotypes.  

Quick Facts

  • Flexible Group 14 herbicide 

  • Best in class control of kochia, including Group 2, Group 4 and Group 9 resistant biotypes 

  • Requires ½” rain, at once, for activation 

  • Apply prior to weed emergence.  If weeds have emerged, add in a supported burnoff tank mix partner 

Labels And SDS

4 Labels Available

Supporting Documents

FMC Cashback

QUALIFIED FOR FMC CASHBACK?

Get as much as 15% cash back on over 50 proven herbicides from FMC.

Sign up for FMC Cashback

Product Overview

Give your crop the clean start it deserves.  PrecisionPac® SZ-75 herbicide is a flexible pre-emergent Group 14 herbicide for soybeans, field peas, chickpeas and wheat (spring and durum).  PrecisionPac® SZ-75 herbicide has best-in-class control of kochia, including Group 2, Group 4 and Group 9 resistant biotypes. Only use PrecisionPac® SZ-75 herbicide or any product containing sulfentrazone one out of every two years. 

SZ-75 Comparison

Crops

Full crop listing

  • Soybeans
  • Field Peas
  • Chickpea
  • Spring Wheat
  • Durum Wheat

  • Alberta
  • Saskatchewan

Product Specifications

Tech Specs

Click to open/close

Chemical Group: 14 

Registered & Supported Tank Mixes: 

  • Glyphosate 

  • Express® SG herbicide / NC-0050 + glyphosate (field peas, soybeans, durum wheat and spring wheat) 

  • Aim® EC herbicide 

  • Intruvix™ II herbicide 

  • 2,4-D LV 700 

  • CF (registered crops) 

  • DB-878 (wheat (durum and spring) 

Timing: 

  • Pre-plant or post-seeding (up to 3 days after seeding) 

Note: PrecisionPac® SZ-75 herbicide requires minimum of 1/2”, at once, of rainfall for activation. For best control, SZ-75 herbicide must be applied and activated prior to weed emergence. To control emerged weeds, tank mix with a supported burnoff tank mix partner. 

FALL APPLICATION: 

SZ-75 herbicide should be applied to stubble or soil surface to allow moisture from rainfall or snow-melt to move the product into the soil.  Apply the product in the fall when the average soil temperature begins to below 10°C. Do not mechanically incorporate in the fall or spring as this can destroy the herbicide barrier and allow weeds to escape the treatment.  Do not apply to frozen soils or existing snow cover to prevent runoff of SZ-75 herbicide. 

Application Information: 

  • Rates: 57 g/ac 

  • Acres per grower bag:  Minimum: 20 acres; Maximum: 120 acres 

  • Surfactant: Please check label for surfactant recommendations based on tank-mix partner 

  • Water volume: Minimum 10 US gal/ac (100 L/ha) 

  • Mixing instructions: For complete mixing instructions, follow WAMLEGS or refer to the label. 

  • PrecisionPac® SZ-75 herbicide should be applied in a uniform broadcast soil application. 

  • Restrictions: 

  • Make one pre-plant or pre-emergence application per 24 months. Do not apply to soils classified as coarse-textured soils. 

  • Do not apply in fine-textured soils with less than 1.5% organic matter. 

  • Do not use on any type of soils with an organic matter content greater than 6%. 

  • Do not use on soils with a pH of 7.8 or greater. 

  • Do not tank mix with Valtera® EZ herbicides (flumioxazin) or with other products containing sulfentrazone. 

  • Do not apply SZ-75 herbicide (or any other product containing sulfentrazone) to spring wheat if an application of Focus® herbicide (or any other product containing pyroxasulfone) was applied in the previous fall. 

  • Do not mechanically incorporate in the fall or spring.  Do not apply to frozen soils or existing snow cover. 

Rates & Packaging: 

  • Rate – 57 g/ac 

  • Min acres – 20 acres 

  • Max acres – 120 acres 

  • Customized package size to fit your sprayer tank or field size 

Water Volume: 

  • Water volume: Minimum 10 US gal/ac (100 L/ha) 

Mixing Instructions: 

  • Start with a clean empty sprayer.  Ensure sprayer is equipped with 50 mesh screens or filters when using FMC products. 

  • Fill sprayer tank ½ full with clean water in order to ensure enough water for added product to dilute properly 

  • With agitator running, slowly add the FMC PrecisionPac® products according to their formulation as shown below in the WAMLEGS chart.   

  • Wettable powders, dispersible granules, soluble granules (WG, DF, SG, WP, SP) 

  • Agitate tank mix thoroughly 

  • Micro-encapsulated suspensions (ME) 

  • Liquid flowables and suspensions (SC, SL, SN, Li, SU, SE) 

  • Emulsifiable concentrate formulations (EC) 

  • Fill spray tank nearly full with water 

  • Glyphosate formulations 

  • Surfactants 

  • Complete filling the spray tank to the desired level 

Become an insider

We want you to be the FIRST to know the latest agronomic news, new product updates, and other information critical to your business. 

Subscribe Now