Quick Facts
1. Immediately after spraying, drain tank completely. Any contamination on the outside of the spraying equipment should be removed by washing with clean water.
2. Rinse inside of the tank with clean water and flush through boom and hoses using at least one-tenth of the spray volume. Drain tank completely, including the sump.
3. Nozzles and filters should be removed and cleaned separately with an All Clear® Extra solution containing 50 ml of All Clear® Extra per 10 litres of water.
4. Half fill the tank with clean water and add FMC All Clear® Extra at the recommended rate. Agitate and then flush the boom and hoses with the cleaning solution. Top up with water making sure the tank is completely full and allow to stand for 15 minutes with agitation. Again, flush the boom and hoses and drain tank completely. Note: If it is not possible to drain the tank completely, step 4 must be repeated.
5. Rinse the tank with clean water and flush through the boom and hoses using at least one-tenth of the spray volume. Drain tank completely.
6. For the disposal of washings, follow the 'Code of Practice for using plant protection products' (DEFRA publications 2006). Do not spray onto sensitive crops or land intended for imminent planting with sensitive crops.
Supporting Documents
Product Overview
The FMC All Clear® Extra full washout procedure is specifically designed to washout FMC ALS herbicides and may not be effective at removing deposits of other products. Unless jointly backed with the other manufacturer, FMC accepts no liability for the use of All Clear Extra to clean out non-FMC ALS herbicides.
Crops
No available crop info
Although this remedy has been extensively tested under a large variety of conditions, the registration holder does not warrant that it will be efficacious under all conditions because the action and effect thereof may be affected by factors such as abnormal climatic and storage conditions; quality of dilution water, compatibility with other substances not indicated on the label and the occurrence of resistance of the pest against the remedy concerned as well as by the method, time and accuracy of application. The registration holder furthermore does not accept responsibility for damage to crops, vegetation, the environment or harm to man or animal or for lack of performance of the remedy concerned due to failure of the user to follow the label instructions or to the occurrence of conditions which could not have been foreseen in terms of the registration. Consult the supplier immediately in the event of any uncertainty.
Get in touch
Learn more about how to use our products and sign up to receive more information.